NearStream AWM20D Solo Wireless Lavalier Microphone with LCD & 200m Range
The NearStream AWM20D is a single-person wireless lavalier microphone for vloggers, teachers, presenters and solo creators. It connects to phones, computers and cameras through USB-C or 3.5mm, filters out background noise at the press of a button, and transmits up to 200 m.
Key features
- One wireless lav mic and one receiver with LCD display
- Up to 200 m line-of-sight range over 2.4 GHz
- AI noise cancelling plus furry windshield
- USB-C and 3.5mm outputs for phones, computers and cameras
- 7-hour mic battery, 6-hour receiver
- 3-level gain, mute and 3.5mm headphone monitoring
Please note: No charging case included. Some Android phones need OTG switched on.
One mic for every device you film with
The NearStream AWM20D is a single-person wireless lavalier microphone for vloggers, teachers, presenters and solo creators. It connects to phones, computers and cameras through USB-C or 3.5mm, filters out background noise at the press of a button, and transmits up to 200 m.
- 1 mic+ 1 receiver
- 200 mline-of-sight range
- 7 hrsmic battery
- USB-C + 3.5mmoutputs
- LCDreceiver display
Up to 200 m wireless range
2.4 GHz adaptive frequency-hopping keeps the signal stable with near-zero latency, up to 200 m in a straight, unobstructed line (about 50 m when the mic faces away).
Clear voice in noisy places
One press turns on AI-assisted ENC noise cancelling, and the furry windshield cuts wind noise outdoors.
Record for hours
The mic runs for about 7 hours and the receiver for 6. Both recharge in about 1.5 hours with the 2-in-1 cable.
No app, no Bluetooth
Plug the receiver into your device, switch on the mic and it connects. The LCD shows pairing, battery, mute and volume, with 3 gain levels on the receiver.
How to connect it
Cameras
Connect the receiver to a DSLR or mirrorless camera with the included 3.5mm TRS cable.
Phones & tablets
Plug into USB-C, or use the Lightning adapter. Some Android phones need OTG switched on.
Computers
Plug into USB-C for OBS, Zoom, Teams and recording software.
Frequently asked questions
Does the NearStream AWM20D work with cameras?
Yes. The receiver has a 3.5mm output and comes with a TRS cable for DSLR and mirrorless cameras, plus a TRRS cable for phones and computers with a 3.5mm port.
What is the difference between the AWM20D and AWM20T?
The AWM20D has one mic and no charging case. The AWM20T has two mics and a charging case; the receiver and features are the same.
How far can the AWM20D transmit?
Up to 200 m in a straight, unobstructed line, and about 50 m when the mic faces away from the receiver.
How long does the AWM20D battery last?
About 7 hours for the mic and 6 hours for the receiver. Both recharge in about 1.5 hours.
Can I monitor audio while recording?
Yes. Plug headphones into the receiver’s 3.5mm port for real-time monitoring.
Specifications
| Model | NearStream AWM20D (AW-AWM20D) |
|---|---|
| System | 1 x transmitter (mic), 1 x receiver |
| Wireless | 2.4 GHz adaptive frequency hopping (AFH) |
| Range | Up to 200 m line of sight; about 50 m reverse direction |
| Polar pattern | Omnidirectional |
| Frequency response | 20 Hz - 20 kHz |
| Max SPL / dynamic range | 112 dB / 87 dB |
| Outputs | USB-C and 3.5mm |
| Controls | 3-level receiver gain, mute button on mic, LCD display |
| Battery | Mic 7 hrs, receiver 6 hrs |
| Weight | Mic 14.8 g, receiver 22.4 g |
| Dimensions | Mic 52.5 x 25 x 10 mm; receiver 48.5 x 34 x 12 mm |
What’s in the box
- 1 x wireless microphone (TX)
- 1 x receiver (RX)
- Furry windshield
- Lightning adapter
- 2-in-1 charging cable
- USB-C to USB-C cable
- 3.5mm TRS camera cable
- 3.5mm TRS to TRRS cable
- Fabric bag, manual and quick start guide
Specifications from NearStream and subject to change without notice. Battery life and range vary with use and environment. Images are for illustration. Box contents may vary by region.
Powered By 
